home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Power Tools 1993 October - Disc 1
/
Power Tools (Disc 1)(October 1993)(HP).iso
/
spec
/
a3821559
/
a3821559.txt
< prev
Wrap
Text File
|
1992-05-09
|
4KB
|
92 lines
Codex 3500 DSU/CSU, Technical Data
For HP Remote Bridge and Multiplexer
Product Number CODX-3500
Codex 3500 combines the functionality of multiple digi-tal transmission
devices into a single, high compact unit. It supports digital
transmission requirements in a broad range of operating environments,
from 2.4 Kbps to 56 Kbps. It can be con-nected with HP2335A
multi-plexer, HP remote bridge, or HP router to transmit data via DDS
facili-ties from central sites to re-mote sites. The Technical
In-formation Guide (TIG) will show how this DSU/CSU can be configured
and connected to work with HP systems.
o Versatile, cost-efficient DSU/CSU that can meet a wide range of
digital transmission speeds and applications
o Combines all data rates in a single unit; supports 2.4, 4.8, 9.6,
19.2, and 56 Kbps
o Unique rate adaption function permits use of lower priced digital
services
o Enables diagnostic testing of local and remote units in both
point-to-point and multipoint configurations
o Integral timing buffer reduces data errors caused by timing variations
between different digital services
o Supports asynchronous to synchronous conversion up to 19.2 Kbps
o Fully tested and qualified to be compatible with HP networking systems
Functional Description
The Codex 3500 was tested and qualified to be compatible with
HP computers and networking systems. Among the tested configurations
include the link from central host computer to remote site via the
combination of HP remote bridge and DSU/CSU over DDS, the link from
central site to remote site via the combination of HP router and DSU/CSU
over DDS, and from central site to remote site via HP 2335A multiplexer
and DSU/CSU over DDS. Refer to the Technical Information Guide (TIG) for
more technical information on how to configure the modem with HP systems
and other considerations.
Note: To connect the DSU/CSU to HP remote bridge, a DB25(M) to
V.35(M) DTE cable is needed (order number: CODX-77999). To connect the
DSU/CSU to HP router, a DB25(M) to V.35(F) DTE cable is needed (order
number: CODX-48523).
HP Hardware Supported
DSU/CSU will function with the following HP products:
o HP 3000
o HP 9000
o HP 2335A mux
o HP 28674A Remote Bridge
o HP Router
Control Panel Tests
o Self Test
o BER Test
o Digital Loopback
o Terminal Loopback
o Remote Loopback
Specifications
Operation: Full-duplex, asynchronous/synchronous, point-to-point or
multipoint DSU/CSU
Data Rates: 56 Kbps, 19.2, 9.6, 4.8, 2.4 Kbps with DDS-I
Customer Interface: User selectable EIA 232 or V.35. 25-pin interface
connector
Line Requirements: DATAPHONE Digital Service DDS-I
Line Interface: RJ48 modular
Dimensions:
Width: 6.6 in
Height: 2.3 in
Depth: 9.6 in
Weight: 2.5 lbs
Power Requirements: 115 Volts AC, 60 Hz, 10 watts maximum
Operating Temperature: 0 degrees to 50 degrees C (32 degrees to 122
degrees F)
Storage Temperature: -40 degrees to 70 degrees C (-40 degrees to 158
degrees F)
Relative Humidity: 5% to 95% non-condensing
Safety approval: UL approved, FCC Class A
Ordering Information
CODX-3500 Codex 3500 Standalone DSU/CSU
CODX-77999 DB25(M) to V.35(M) cable (for HP remote bridge)
CODX-48523 DB25(M) to V.35(F) cable (for HP router)
Technical Support
Provided by Codex at (800) 544-0062
Technical Information
Refer to Technical Information Guide (TIG). (LDC order number:
5091-0837EUS)
From HP Networking Communications Specifications Guide,
5091-3821E, 9205, p 559
Associated files: none
Codex 3500 DSU/CSU, Technical Data